Электроэрозионный станок Mitsubishi FX20K

Preis: Contact us for price
Manufacturer
Mitsubishi
Model
FX20K
Type
Wire EDM machine (Wire erosion)
Year of Manufacture
1999
Workpiece and Table Specifications
Maximum workpiece size (W x D x H): 1,050 x 800 x 295 mm
Maximum workpiece weight: 800 kg
Table dimensions: 780 x 630 mm
Axis travel (X / Y / Z): 500 x 350 x 300 mm
Maximum table feed rate: 1,300 mm/min
Wire and Cutting Specifications
Wire diameter: 0.2 to 0.3 mm
Maximum wire feed rate: 250 mm/sec
Wire tension: 2 to 25 N
Machine Dimensions and Weight
Overall machine dimensions (W x D x H): 1,810 x 2,310 x 2,050 mm
Filter System
Tank capacity: 635 litres
Filter flow rate: 30 l/min
Filter fineness: 3 micrometres
Filtration: Paper filter (2 units)
Conductivity control: 0.5 to 100 x 10 ohm/cm
Filter unit dimensions (W x D x H): 800 x 1,700 x 1,720 mm
Filter unit weight (empty): 230 kg
Generator Unit
Power unit type: Transistor stage
Maximum working current: 50 A
No-load voltage settings: 16
Working current settings: 18
Pulse pause settings: 16
Control type: CNC closed-loop
Controlled axes: X
Y
U
V
Z — max. 5 simultaneous
Input resolution: 1 micrometre on all axes
Minimum command increment: 0.1 micrometre
Interpolation: Linear
circular
and spiral
Display: 14 inch / 37 cm colour screen
Character representation: Alphanumeric
Command input: Absolute and incremental
Scale magnification: 0.000001 to 99.999999
Feed control: Automatic optimisation based on spark gap or constant feed
Path offset: plus/minus 99,999.999 mm
OFFSET 1 to 900
Technology packs: 1 to 1999
Number of program addresses: 1 to 99,999,999
Subroutine nesting: 30 levels
RS-232C interface: Yes (including DC1
DC3)
MDI data input: 100,000 characters (260 m NC tape equivalent)
Power supply: 3-phase
200/220 VAC plus/minus 10 percent
50/60 Hz
13.5 kVA
Find more here
показать контакты
Contact us at
показать контакты