Обрабатывающий центр для дерева Homag PROFI BMG 512/40/12/V/A

This 4-axis HOMAG PROFI BMG 512/40/12/V/A was manufactured in 2016, featuring a POWEREDGE gluing unit and a 4-fold edge magazine. It includes an 18-fold disc tool-changer, a 12 kW processing spindle, and a C-axis with unlimited swivel range. The machine supports workpiece lengths up to 4000 mm and thicknesses up to 300 mm. Ideal for advanced woodworking, it offers dynamic space allocation for optimal processing area utilization. Contact us for more information about this machine.
Additional information
Workpiece
Lengths: 4000 mm for single placement / 2250 mm for pendulum placement
Widths: 1450 mm for all units and front stop
Maximum Workpiece Thickness: 300 mm (including clamping devices)
Up to 60 mm with standard clamps without restrictions for units and extraction.
Table
Automatic Console Table
Automatically adjustable console table
8 consoles Y = 1500 mm
16 side and stop pins 140 mm, electromechanically controlled
Dynamic space allocation for optimal utilization in pendulum operation
Various double vacuum clamps
Without vacuum pump; supplied via a building-side vacuum system
Tools
18-fold disc tool-changer
Main Drive
Processing Spindle: 12 kW (S6 operation) / 9.5 kW (S1 operation)
Spindle with hybrid bearings
Frequency-controlled rotation: 0 - 24000 rpm
Automatic feed reduction with decreasing spindle speed
Injection Unit
POWEREDGE Gluing Unit
Gluing unit for 360° edge gluing on butt joints
Glue application via application roller onto edge material
1 pressure roller Ø 50 mm, 1 follow-up roller Ø 35 mm
Max. edge height: 65 mm
Edge thickness: 0.4 - 3 mm (veneer 0.4 - 2 mm / PVC 1.0 - 2 mm)
Hot air nozzle for heating thick edges on small radii, controllable via NC
Machine Control
POWERCONTROL PC 86 POWERTOUCH
With 21.5" Full-HD multitouch display
WoodWOP for graphical, dialog-oriented creation of CNC programs
Diagnostic system WOODSCOUT
Additional Equipment
Interface for FLEX 5 unit
C-axis with unit interface
Unlimited swivel range
Coupling element for automatic tool change of FLEX 5 unit
Drilling Head
21 spindles V17 / H4 / S0 / 90°
17 vertical drilling spindles with quick-change system
T-shaped arrangement: 7 spindles in Y-direction / 11 spindles in X-direction
4 horizontal spindles with saw 0 / 90°
Pre-cutting Station
Moves with the processing portal (X-axis)
Saw / Trimming Unit for Tool Changer
Combined trimming and corner rounding unit, sensor-controlled
Combined flush-trim / pull-knife unit
Extra Information
Coolant tank for processing spindle
Integrated chip conveyor, discharging to the left
Note: The technical data and descriptions are for informational purposes only and are not binding.
application type: CNC Wood Machining
Location: Germany
machine type: CNC Processing Center