Редуктор хода Nachi PHV-3B 20/925259 для мини-экскаватора JCB 8032

1. Product Identification
Component: Complete Final Drive Assembly (Travel Motor + Planetary Reducer)

Main Hydraulic Motor Model: Nachi PHV-3B Series

OEM Part Numbers: 20/925259 (20925259), 20/925371 (20925371), 20/950386 (20950386)

Machine Compatibility:

JCB 8027 ZTS / 8032 ZTS (Zero Tail Swing)

JCB 803 PLUS / 803 SUPER

JCB 802.7 SUPER

JCB 804 SUPER

Condition: High-Quality Premium Aftermarket (Direct Bolt-On Replacement)

2. Technical Specifications
Motor Type: Two-Speed Axial Piston Motor (Nachi PHV Architecture)

Reducer Type: Multi-Stage Compact Planetary Gear Track Reducer

Speed Selection: Automatic or manual high/low speed shifting capability matching JCB original factory specifications.

Mechanical Braking: Integrated spring-applied, hydraulic-released multi-disc parking brake for secure slope operations.

Structural Fit: Precision-machined flange bolt-hole configurations matching standard track frame installations.

3. Critical Installation Requirements
Verify and Clear the Case Drain Line (Mandatory)
Before mounting, ensure the dedicated case drain hose running back to the hydraulic tank is completely free of debris or blockages. A restricted case drain line creates massive backpressure inside the motor housing, which will instantly blow the main shaft seal and cause immediate internal damage.

Prime the Hydraulic Motor Case
You must manually fill the hydraulic piston section of the final drive with fresh, clean hydraulic oil through the highest available case drain port before tracking the machine. Running a piston motor dry will destroy the piston shoes within seconds.

Gearbox Oil Fill
The planetary reduction section requires heavy-duty gear oil (typically SAE 80W-90 or 90) completely separate from the hydraulic oil system. Check that the gearbox is pre-filled to the proper level plug mark before operation.

Break-In Gear Lube Schedule
Brand-new planetary gears go through an initial wear-in cycle. It is highly recommended to drain and replace the gearbox oil after the first 50 to 100 operating hours to eliminate initial wear particles, then change it every 250 to 500 hours thereafter.

4. Frequently Asked Questions (FAQ)
Q: Are the 20/925259, 20/925371, and 20/950386 part numbers interchangeable?
A: Yes, these numbers represent different engineering supersessions and variations across the JCB mini excavator lines. They all build into the standard Nachi PHV-3B motor frame size and fit the designated 3-ton to 4-ton class JCB track frames. Always provide your machine's serial number to verify your track sprocket bolt hole count.

Q: My excavator tracks normally in one direction but slowly drifts or loses power in the other. Is the final drive broken?
A: If the issue happens in only one direction or only when the machine gets hot, it suggests high internal volumetric oil bypass inside the hydraulic motor section. As the clearances increase with wear, high-pressure oil leaks back to the tank instead of turning the tracks, necessitating a replacement.

Q: How is this drive shipped safely to avoid damage?
A: Each assembly is thoroughly drained of testing fluids, treated with a rust-inhibitor coating, fitted with heavy-duty port plugs, and bolted down inside a reinforced export shipping container to protect the mounting flanges and shafts.

5. Shipping & Logistics
Packaging: Heavy-duty export-ready secure protective crate.

Transit Time: Global express air freight via DHL/FedEx/UPS typically delivers within 3 to 7 business days directly to your workshop.