Uus metalli treipink

Bed: The overall box-type slant bed is used to achieve excellent stability and high rigidity. The bed uses finite element analysis (FEM) to optimize the design of the ribs inside the integrated bed. The strength of the bed is 30% higher than the traditional design, and the heat flow balance design can meet the long-term processing requirements. The bed is cast from high-strength cast iron and resin to provide sufficient rigidity, strength and stability for the bed. The guide rails are all rectangular hard rail structure, with large bearing capacity, good anti-vibration performance, improved machine tool characteristics, improved machine tool accuracy and precision stability, and improved machine tool life.
Spindle box: The spindle box incorporates the latest Japanese design technology. It adopts high-precision, high-speed, high-rigidity and independent single-spindle structure to match high-speed and high-torque spindle motors, which greatly improves production efficiency and achieves excellent machining results. The spindle bearing adopts imported bearings (NSK, etc.) and grease lubrication technology, which makes the spindle have high precision, high speed, high load and low temperature rise. It can not only withstand large power and high torque cutting, but also has high spindle precision and life.

RTC3550
Processing capacity Maximum swing diameter Φ580mm
Maximum swing diameter on the saddle Φ350mm
Maximum machining diameter Φ430mm
Maximum processing length 500mm
Rod through the operating capacity Φ75mm
Trip X-axis stroke 325mm
Z-axis stroke 600mm
Spindle Spindle model/aperture A2-8/Φ87
Card size N210/A2-8
Hydraulic swing cylinder M1875/Φ75mm
Maximum speed 2500rpm
Variable speed sins Stepless speed regulation
Spindle nose form Optional: A2-11/Diameter105mm
Knife Tower Knife Tower Form Servo turret
Number of tools 12
Knife rod size 25*25mm
Knife rod diameter Φ50mm
Feed speed X-axis fast-forward speed 20000mm/min
Z-axis fast-forward speed 20000mm/min
Tail-seating itinerary Φ430mm
Motor Spindle motor 18.5kW
Hydraulic pump motors 1.5kW
Cooling pump motor 1.5kW
hydraulic Power capacity 35kVA
Gas source 0.5mpa(5kgf/cm2)，150L/min
Hydraulic 2.5-5Mpa
Cooling Tank capacity 150L
size/weight Machine height 1970
Machine accuracy Repeat positioning accuracy (X/Z axis) 0.006mm
Positioning accuracy (X/Z axis)0.012mm

kuva kontaktid