Muud rehvivahetuse seadmed TyreON Truck tools
Akersloot
Kui olete otsustanud osta madala hinnaga tehnikat, veenduge, et suhtlete tegeliku müüjaga. Uurige välja võimalikult palju infot tehnika omaniku kohta. Üks petmisviisidest on esineda tegelikult olemasoleva ettevõtte nime all. Kahtluste tekkimise korral teatage sellest meile tagasisidevormi kaudu, et saaksime asja täiendavalt kontrollida.
Enne ostu sooritamist uurige hoolikalt erinevaid müügipakkumisi, et selgitada välja teie poolt valitud tehnika mudeli keskmine hind. Kui teie valitud müügipakkumise hind on oluliselt madalam sarnaste pakkumiste hindadest, olge ettevaatlik. Suur hinnaerinevus võib viidata varjatud defektidele või müüja petmiskatsele.
Ärge ostke kaupa, mille hind erineb tunduvalt analoogse tehnika keskmisest hinnast.
Ärge nõustuge kahtlaste tagatis- ja ettemaksudega. Kahtluste korral ärge kartke täpsustada üksikasju, küsige müüdava tehnika lisafotosid ja dokumente, kontrollige dokumentide ehtsust, esitage lisaküsimusi.
See on kõige levinum petmise viis. Ebaausad müüjad võivad küsida teatud ettemaksusummat, et „broneerida“ teile tehnika ostmise õigus. Sel moel võivad petised koguda suure rahasumma ja seejärel kaduda, nii et nendega pole enam võimalik ühendust võtta.
- Ettemaksu kandmine kaardile
- Ärge makske ettemaksu, vormistamata dokumente, mis tõendavad raha üleandmise akti, kui teil tekib müüjaga suhtlemisel kahtlusi.
- Raha kandmine „vahendaja“ kontole
- Selline palve peab tegema ettevaatlikuks; tõenäoliselt suhtlete kelmiga.
- Raha kandmine sarnase nimega ettevõtte kontole
- Olge tähelepanelikud, kelmid võivad esineda tuntud ettevõtete nimel, tehes ettevõtte nimes väikeseid muudatusi. Ärge kandke raha üle, kui ettevõtte nimi tekitab kahtlusi.
- Oma pangarekvisiitide märkimine reaalse ettevõtte nimel esitatud arvele
- Enne ülekande tegemist kontrollige, kas arvele märgitud pangarekvisiidid on õiged ja kuuluvad vastavale ettevõttele.
Müüja kontaktid
+31 6 537...
Kuva
+31 6 53701658
+31 72 540...
Kuva
+31 72 540 1002
Holland 
Kreeka, Chalkidiki
Ukraina, Zhytomyr
Saksamaa, Niederlangen
Saksamaa, Niederlangen
Saksamaa, Niederlangen
Saksamaa, Niederlangen
Saksamaa, Niederlangen
Holland, Akersloot
Holland, Akersloot
Holland, Akersloot
Holland, Akersloot
Holland, Akersloot
Holland, Akersloot
Holland, Akersloot
Saksamaa, Pullach
Holland, Akersloot
Holland, Akersloot
Holland, Akersloot
Holland, Akersloot
500 €
Käibemaksuta
Leedu, Jonava
Impact wrench TyreON 3260 Nm
Impact wrench TyreON 2180 Nm
Impact wrench TyreON 1450 Nm
The pneumatic impact wrench is indispensable when changing tires.Quality, reliability and safety are therefore a must. TyreON has a number of quality air tools in its range.
TyreON impact wrenches have been developed for heavier mounting and dismantling applications on wheel nuts and wheel bolts.
3 models available from stock
TyreON 3260 Nm-
1 Inch impact wrench with long anvil of 20 cm (8 Inch)
TyreON 2180 Nm-
1 Inch impact wrench with long anvil of 20 cm (8 Inch)
TyreON 1450 Nm-
3/4 Inch impact wrench with short anvil of 4 cm (1.5 Inch)
TyreON 3260 Nm 1 Inch impact wrench with long shaft
The TyreON 3260 Nm impact wrench with extended anvil offers a very high torque of 3260 Nm.
The airwrench with long stroke shaft is particularly suitable for loosening nuts and bolts and changing tires of vehicles such as trucks, lorries, trailers, buses, agricultural vehicles and light construction equipment.
Straight version with loose breaking torque of 3260 Nm / 2400 ft lbs - truck tool with rocking dog pinless hammer impact mechanism.
The advantage of the rocking dog pinless hammer impact mechanism is that the shaft can be turned by hand in the rest position and this accelerates and facilitates the placement of the impact wrench on the nut.
Drive Square 1 "(Inch)
Anvil 20 cm - 8 Inch
Nut or bolt capacity 50 mm
3 position power controller, forward and reverse
No-load speed 3600 rpm
Torque working range 1300 to 2850 Nm
Air inlet 1/2 "NPT
Required hose size 1/2 "- 13 mm
Air pressure 8-12 Bar - 115-175 psi
Air consumption at full load- 40 cfm
Net weight 18.5 KG
With 2 sockets 1-1 / 2 "(38mm) + 1-5 / 8" (41mm)
TyreON 2180 Nm 1 Inch impact wrench with long shaft
The TyreON 2180 Nm impact wrench with extended anvil offers a very high torque of 2180 Nm.
The airwrench with long stroke shaft is particularly suitable for loosening nuts and bolts and changing tires of vehicles such as trucks, lorries, trailers, buses, agricultural vehicles and light construction equipment.
Straight version with breakaway torque of 2180 Nm / 1600 ft lbs - truck tool with rocking dog pinless hammer impact mechanism
The advantage of the rocking dog pinless hammer percussion mechanism is that the shaft in the rest position is loose and can be turned by hand, which speeds up finding the correct position of the cap on the bolt or nut.
Drive Square 1 "(Inch)
Anvil 20 cm - 8 Inch
Nut or bolt 41 mm
3 position power controller, forward and reverse
No-load speed 4200 rpm
Torque working range 900 to 1850 Nm
Air inlet 1/2 "NPT
Required hose size 1/2 "- 13 mm
Air pressure 8-12 Bar - 115-175 psi
Air consumption at full load- 40 cfm
Net weight 14 KG
With 2 socktes 1-1 / 2 "(38mm) + 1-5 / 8" (41mm)
TyreON Automotive Equipment
1921 CZ Akersloot
The Netherlands (EU)
(T) kuva kontaktid
(E) kuva kontaktid
Our showroom is open from Monday to Friday from 9 a.m. to 5 p.m.
TyreON 1450 Nm 3/4 inch impact wrench with short shaft
The TyreON 1450 Nm impact wrench has a high torque of 1450 Nm.
The airwrench is suitable for loosening nuts and bolts and changing tires of vehicles such as trucks, trucks, trailers, buses, light construction equipment and agricultural vehicles.
Straight version with breakaway torque of 1450 Nm / 1075 ft lbs - truck tools with twin hammer hammer mechanism
The twin hammer stroke mechanism gives a high energy per stroke. The energy is transmitted directly to the drive square for maximum power.
Drive square 3/4 "
Anvil 4 cm - 1.5 Inch
Nut or bolt capacity 32 mm
3 position power controller, forward and reverse
Idle speed 5300 rpm
Torque working range 600 to 1300 Nm
Air inlet 3/8 "NPT
Required hose size 3/8 "- 10 mm
Air pressure 8-12 Bar - 115-175 psi
Air consumption at full load- 40 cfm
Net weight 5.8 KG
With 2 sockets 1-1 / 2 "(38mm) + 1-5 / 8" (41mm)
Prices truck tools - Air impact wrenches
TyreON 3260 Nm
- € 495, - excl. VAT
1 "impact wrench with 20 cm long anvil
TyreON 2180 Nm
- € 395, - excl. VAT
1 "impact wrench with 20 cm long anvil
TyreON 1450 Nm
- € 195, - excl. VAT
3/4 "impact wrench 4 cm short anvil
Truck tools