Uus paksusmasin Robland D 510

Standard equipment on the machine: digital read-out with precision 1/10 mm
(Optional: 4 reversible knife cutter block)
Option: table rollers
Standard equipment on the D-510: power rise and fall of the table, digital read-out with precision 1/10 mm. (capacity 250 mm)
Standard on all machines: heavy pushers on both in-and outfeed side, 100 mm diameter, 4 knife 18% HSS cutter-block with magnetic knife setter jigs. The optional 4 turn blades cutter-block provides a major advantage of quick precision setting of knives. Also standard feature on the machine: separate motor drive of feed rollers with 4 speeds (5/8/10/16 m/min.)
year of manufacture: NEW
Table
The thicknesser table
mounted via 4 big posts offers great stability
even when planing long
heavy timbers
For wet or damp timber
fully retractable rollers can be provided. Please note that this option must be ordered with the initial order for the machine
Planed table
The big cast iron table is precision planed for smooth sliding of the wood
Highest quality ‘cold process machining’ is used
which produces ensures that the table surface stays absolutely flat throughout its life
Digital read-out
Frame
The frame is built of 6 mm steel plate
and is carefully designed to maximise strength and rigidity
it’s made in a so called ‘box frame’ resulting in an extremely sturdy and torsion resistant base
Serrated infeed roller
Wood pushers on both in-and outfeed side
Four 18% HSS knife cutter-block
Smooth outfeed roller
Motors and transmissions
The machine is equipped in the standard version with a 5,5 kW (7,5 hp) motor
Optional motor of 7,5 kW (10 hp) can be provided. Standard tension of the machine is 400 Volt
upon request the machine can be made in 230 Volt three phase
The transmission of the cutter block is achieved by double V-belts
the transmission of the feed rollers is achieved by sprockets and chains
Thicknesser capacity
Feeding of the wood
Positioning the table at 1/10 mm poses no problem thanks to the frequency variator controlled rise and fall drive
Technical specifications
Motor power kW 5
5
Number of knives 4
Dimensions knives mm 510 x 28 x 3
Dimensions table mm 1050 x 510
Diameter suction outlet mm 160
Diameter cutter-block mm 100
Thicknesser capacity mm 250
Feeding speeds m/min 5 / 8 / 10 / 16
Serrated infeed roller mm 1 dia 50 mm
Outfeed roller mm 1 dia 50 mm