Tööstuslik kompressor SIAD Tempo 1500

Description

Used compressor Siad Tempo 2004


Full maintenance in early 2022 of this Siad HP compressor, 2000 working hours of autonomy until the next routine maintenance deadline for this Siad HP compressor 1500 HP compressor.


OIL FREE AIR COMPRESSION UNIT with a capacity of 1500 m³/h having the following main working data:


‑ gas to be compressed


air


– electric feeding


380 V +/-5% 50 Hz


Suction conditions


– altitude


500 m.s.l.m.


– temperature min./max. internal


10/35 °C


– temperature min./max. external


-5/45 °C


– relative humidity


50 %


– wet bulb


26 °C


Delivery Conditions


-max. pressure


42 bar


‑output at suction conditions


1500 m³/h


‑pneumatic part working


dry


‑rotation speed


750 rpm


‑average piston speed


3,75 m/sec


-electric motor


4 poles


– installed power


315 kW


‑shaft power


270 kW


-electric motor execution


IP 23


-coupling


V-belts


‑ cooling:


water


- T inlet/outlet water


10 °C approx


-approx. water requirement


27 m³/h


Structural features of the Used compressor Siad:


The pneumatic part consists of three-cylinder lines and double-acting pistons.

Geometrical data of the Siad HP compressor:


‑Stroke


150 mm


‑1st stage


440 mm


‑2nd stage


240 mm


‑3rd stage


130 mm


The Used compressor will be supplied complete with:




suction filter capacity of 10 microns


safety valve at each stage of delivery


pressure gauge at each stage of delivery


oil pressure and temperature gauge


crankcase lubrication group with oil pump, single oil filter, oil cooler our standard type, automatic lubricating pump


cooling water piping


interstage air piping in stainless steel


inter and after coolers


pulsation damper/moist separator in carbon steel internally treated with cataphoresis coating (stainless) after each stage delivery


with automatic condensate traps “Siadcoin” type, on each moisture separator, complete with an insulating valve




Central Skid of Siad HP compressor including:




water pump


expansion vessel


flexible houses




Oil heater of Siad HP compressor:




Set of special vibration-damping supports to be placed between the steel baseplate and the floor.

Siad HP compressor supports do not require stable fixing to the floor but are only positioned using pads included in the supply.


Electric driving and control panel PLC standard suitable for the automatic running of the compression line.


ACCESSORIES including:

A
ir drying unit HPD 340 of Siad HP compressor





Compressor Type: HP High pressure
No. of stages: Multi
Power output: 315 kwH
Air flow: 1500 m³/h
Safety features: Yes
Manuals: Yes
marca: SIAD
stato: In storage