Tootmisliin Complete Reel-to-Reel (R2R) LED Strip SMT Production Line



















Kui olete otsustanud osta madala hinnaga tehnikat, veenduge, et suhtlete tegeliku müüjaga. Uurige välja võimalikult palju infot tehnika omaniku kohta. Üks petmisviisidest on esineda tegelikult olemasoleva ettevõtte nime all. Kahtluste tekkimise korral teatage sellest meile tagasisidevormi kaudu, et saaksime asja täiendavalt kontrollida.
Enne ostu sooritamist uurige hoolikalt erinevaid müügipakkumisi, et selgitada välja teie poolt valitud tehnika mudeli keskmine hind. Kui teie valitud müügipakkumise hind on oluliselt madalam sarnaste pakkumiste hindadest, olge ettevaatlik. Suur hinnaerinevus võib viidata varjatud defektidele või müüja petmiskatsele.
Ärge ostke kaupa, mille hind erineb tunduvalt analoogse tehnika keskmisest hinnast.
Ärge nõustuge kahtlaste tagatis- ja ettemaksudega. Kahtluste korral ärge kartke täpsustada üksikasju, küsige müüdava tehnika lisafotosid ja dokumente, kontrollige dokumentide ehtsust, esitage lisaküsimusi.
See on kõige levinum petmise viis. Ebaausad müüjad võivad küsida teatud ettemaksusummat, et „broneerida“ teile tehnika ostmise õigus. Sel moel võivad petised koguda suure rahasumma ja seejärel kaduda, nii et nendega pole enam võimalik ühendust võtta.
- Ettemaksu kandmine kaardile
- Ärge makske ettemaksu, vormistamata dokumente, mis tõendavad raha üleandmise akti, kui teil tekib müüjaga suhtlemisel kahtlusi.
- Raha kandmine „vahendaja“ kontole
- Selline palve peab tegema ettevaatlikuks; tõenäoliselt suhtlete kelmiga.
- Raha kandmine sarnase nimega ettevõtte kontole
- Olge tähelepanelikud, kelmid võivad esineda tuntud ettevõtete nimel, tehes ettevõtte nimes väikeseid muudatusi. Ärge kandke raha üle, kui ettevõtte nimi tekitab kahtlusi.
- Oma pangarekvisiitide märkimine reaalse ettevõtte nimel esitatud arvele
- Enne ülekande tegemist kontrollige, kas arvele märgitud pangarekvisiidid on õiged ja kuuluvad vastavale ettevõttele.
Müüja kontaktid




















TYPE OF MACHINE
Complete reel-to-reel (R2R) production line for flexible LED strips
with a solder paste printer
pick and place machine
soldering oven
circuit tester
cutting system
cleaning system and all supporting equipment
LINE BUILDER
db-matik
YEAR OF MANUFACTURE
Line 2014. Individual machines from 2013 to 2015
see list below
CONDITION
Used
HOW THE LINE WORKS
Rolls of flexible film (flex foil) are loaded into the input module and transported through the individual modules. The film is printed
populated with components
soldered and tested. The finished
functional LED strips are cut to specific lengths and wound onto output spools. The line can be converted for other film materials with change kits
LINE MODULES (db-matik)
Input module with spooler
strip buffer and splicing point for joining a new roll to the previous one
Indexer for the Siplace placement process
with vacuum suction of the film and hitch feed drive. A camera detects the markers on the film
Tester and strip buffer. The film is contacted with spring contacts and all circuits are measured. Errors are saved to a file
so the fault location on the film can be viewed. Interchangeable test plates for products of 8 mm or 15 mm
Output module with hitch feed
splicing point and spooler with numbered spools and spool trolley
Connection values of the handling line: 230 V AC
1,200 W
compressed air 5.5 bar. Noise level below 70 dB(A)
MACHINES INCLUDED IN THE LINE
1. EKRA XH RtR SOLDER PASTE PRINTER
Manufacturer: EKRA
Electrical data: 400 V AC
3 phase
50/60 Hz
24 V DC working voltage
16 A circuit breaker
Compressed air: 6 bar
2. ASM SIPLACE SX PICK AND PLACE MACHINE
Manufacturer: ASM
Electrical data: 230/400 V
50/60 Hz
Compressed air: 5 to 10 bar
600 Nl/min
Includes component feeders: 11 pieces 2 x 8 mm
3 pieces 1 x 12 mm
4 pieces 1 x 12 mm (variant 2). Some of the feeders require servicing
3. REHM R2R-A SOLDERING OVEN
Manufacturer: Rehm
Year of manufacture: November 2015
Heating: 3 heating zones
each 500 mm long
infrared radiators. Soldering temperature 230 to 250 degrees C. Heating gradient up to 4 K/s
Process chamber: length 1,800 mm
Electrical data: 3 x 400 V AC
50/60 Hz. Connected load 27.5 kW
Conveyor: width 500 mm
Cooling water: up to 10 l/min
2 to 7 bar
Exhaust: 150 mm socket
600 cubic metres per hour
4. ARISTO ARISTOMAT TL 1310
Manufacturer: ARISTO
Year of manufacture: August 2013
Electrical data: 400 V AC
3 phase
31.5 A
5. GEN3 GENSONIC
Manufacturer: Gen3 Systems
Used to clean the solder paste stencils. CE declaration dated 2014
6. ASYS CONSIDUS DRY STORAGE N-1800M
Manufacturer: ASYS
Nitrogen or compressed air flushed dry storage cabinet system with nine compartments with glass doors
on castors
7. JOERNS PUREX9000 FUME EXTRACTION SYSTEM
Manufacturer: JOERNS
Digital fume extraction unit
CE and EMC marked. Model series 1500i (230 V) or 2000i (400 V)
8. LINX 7900 CONTINUOUS INK JET PRINTER
Manufacturer: Linx
9. BUSCH VACUUM PUMP
(side channel blower
Samos SB series)
Manufacturer: Busch
10. MARK OFMS11 SCREW AIR COMPRESSOR
Manufacturer: Mark Compressors (Atlas Copco )
Pressure: maximum 10 bar (145 psi)
Capacity: 17 l/s (36 cfm
1.02 cubic metres per minute)
2,885 rpm
Electrical data: 400 V
3 phase
DOCUMENTATION: Operating manual for the complete line (db-matik
with change kit instructions)
datasheet of the Rehm oven
manuals of the dry storage cabinet
fume extraction unit and vacuum pump
and declarations of conformity
INSPECTION: The line can be inspected. An operating video and photos of the complete line are available
Find more here
kuva kontaktid
Contact us at
kuva kontaktid