Mootor MAN D2676LE423 (i6-800) marine engine tüübi jaoks MAN
Hörsching7279 km to "United States/Columbus"
Kui olete otsustanud osta madala hinnaga tehnikat, veenduge, et suhtlete tegeliku müüjaga. Uurige välja võimalikult palju infot tehnika omaniku kohta. Üks petmisviisidest on esineda tegelikult olemasoleva ettevõtte nime all. Kahtluste tekkimise korral teatage sellest meile tagasisidevormi kaudu, et saaksime asja täiendavalt kontrollida.
Enne ostu sooritamist uurige hoolikalt erinevaid müügipakkumisi, et selgitada välja teie poolt valitud tehnika mudeli keskmine hind. Kui teie valitud müügipakkumise hind on oluliselt madalam sarnaste pakkumiste hindadest, olge ettevaatlik. Suur hinnaerinevus võib viidata varjatud defektidele või müüja petmiskatsele.
Ärge ostke kaupa, mille hind erineb tunduvalt analoogse tehnika keskmisest hinnast.
Ärge nõustuge kahtlaste tagatis- ja ettemaksudega. Kahtluste korral ärge kartke täpsustada üksikasju, küsige müüdava tehnika lisafotosid ja dokumente, kontrollige dokumentide ehtsust, esitage lisaküsimusi.
See on kõige levinum petmise viis. Ebaausad müüjad võivad küsida teatud ettemaksusummat, et „broneerida“ teile tehnika ostmise õigus. Sel moel võivad petised koguda suure rahasumma ja seejärel kaduda, nii et nendega pole enam võimalik ühendust võtta.
- Ettemaksu kandmine kaardile
- Ärge makske ettemaksu, vormistamata dokumente, mis tõendavad raha üleandmise akti, kui teil tekib müüjaga suhtlemisel kahtlusi.
- Raha kandmine „vahendaja“ kontole
- Selline palve peab tegema ettevaatlikuks; tõenäoliselt suhtlete kelmiga.
- Raha kandmine sarnase nimega ettevõtte kontole
- Olge tähelepanelikud, kelmid võivad esineda tuntud ettevõtete nimel, tehes ettevõtte nimes väikeseid muudatusi. Ärge kandke raha üle, kui ettevõtte nimi tekitab kahtlusi.
- Oma pangarekvisiitide märkimine reaalse ettevõtte nimel esitatud arvele
- Enne ülekande tegemist kontrollige, kas arvele märgitud pangarekvisiidid on õiged ja kuuluvad vastavale ettevõttele.
Müüja kontaktid
+358 50 53...
Kuva
+358 50 5345498
+358 9 231...
Kuva
+358 9 23165797
Austria 
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
mootor
Austria, Deutsch Goritz
Austria, Hörsching
Hiina, Baoding, Hebei
Saksamaa, KI
Türgi, İZMİR/TURKEY
Belgia, TEMPLOUX
Türgi, İZMİR/TURKEY
Leedu, Kaunas
Belgia, Waregem
Belgia, Hamont
Ühendkuningriik, Dudley
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215