Hüdropump Hitachi HPV102GW-25A 9191164 9195235 tüübi jaoks ekskavaatori Hitachi ZX200 ZX200-3 ZX200-3G ZX210LC-3G ZX210H-3G ZX210K-3G
Kui olete otsustanud osta madala hinnaga tehnikat, veenduge, et suhtlete tegeliku müüjaga. Uurige välja võimalikult palju infot tehnika omaniku kohta. Üks petmisviisidest on esineda tegelikult olemasoleva ettevõtte nime all. Kahtluste tekkimise korral teatage sellest meile tagasisidevormi kaudu, et saaksime asja täiendavalt kontrollida.
Enne ostu sooritamist uurige hoolikalt erinevaid müügipakkumisi, et selgitada välja teie poolt valitud tehnika mudeli keskmine hind. Kui teie valitud müügipakkumise hind on oluliselt madalam sarnaste pakkumiste hindadest, olge ettevaatlik. Suur hinnaerinevus võib viidata varjatud defektidele või müüja petmiskatsele.
Ärge ostke kaupa, mille hind erineb tunduvalt analoogse tehnika keskmisest hinnast.
Ärge nõustuge kahtlaste tagatis- ja ettemaksudega. Kahtluste korral ärge kartke täpsustada üksikasju, küsige müüdava tehnika lisafotosid ja dokumente, kontrollige dokumentide ehtsust, esitage lisaküsimusi.
See on kõige levinum petmise viis. Ebaausad müüjad võivad küsida teatud ettemaksusummat, et „broneerida“ teile tehnika ostmise õigus. Sel moel võivad petised koguda suure rahasumma ja seejärel kaduda, nii et nendega pole enam võimalik ühendust võtta.
- Ettemaksu kandmine kaardile
- Ärge makske ettemaksu, vormistamata dokumente, mis tõendavad raha üleandmise akti, kui teil tekib müüjaga suhtlemisel kahtlusi.
- Raha kandmine „vahendaja“ kontole
- Selline palve peab tegema ettevaatlikuks; tõenäoliselt suhtlete kelmiga.
- Raha kandmine sarnase nimega ettevõtte kontole
- Olge tähelepanelikud, kelmid võivad esineda tuntud ettevõtete nimel, tehes ettevõtte nimes väikeseid muudatusi. Ärge kandke raha üle, kui ettevõtte nimi tekitab kahtlusi.
- Oma pangarekvisiitide märkimine reaalse ettevõtte nimel esitatud arvele
- Enne ülekande tegemist kontrollige, kas arvele märgitud pangarekvisiidid on õiged ja kuuluvad vastavale ettevõttele.
Müüja kontaktid
+86 199 246...
+86 199 2461 6345
Hiina
Mehhiko, Chihuahua
Mehhiko, Chihuahua
The HPV102GW-25A is engineered for a wide range of Zaxis models, particularly those operating in diverse global markets (including the rugged 3G series):
Standard Models: ZX200, ZX200-3
G-Series (Global/Rugged): ZX200-3G, ZX210LC-3G
Specialized Variants: * ZX210H-3G (Heavy-duty for mining/quarrying)
ZX210K-3G (Demolition/Debris handling)
Pump Identification: Often associated with Hitachi part numbers such as 9257161, 9256125, or 9260105.
2. Technical Specifications & Features
Type: Tandem Variable Displacement Axial Piston Pump.
Architecture: Dual-pump configuration providing independent flow for travel and attachment circuits.
Control Logic: Equipped with the 25A-style regulator, which is factory-tuned for the torque output of the Isuzu 4HK1 or 6BG1 engines used in these models.
Durability: Features reinforced swash plates and precision-lapped valve plates to handle continuous operating pressures of 34.3 MPa (343 bar).
3. Why Use Original Brand Parts?
The ZX200 series is the "workhorse" of many fleets. Using an Original Brand pump is essential to avoid the common pitfalls of budget alternatives:
Hydraulic "Function Drop": Original pumps ensure that when you boom up and swing simultaneously, the oil is divided exactly as intended. Non-genuine pumps often cause one function to stop or slow down significantly.
Fuel Savings: The original regulators are calibrated to destroke the pump when joysticks are in neutral. Aftermarket pumps with poor tolerances often "leak" power, causing higher fuel consumption and engine heat.
Heat Management: Original metallurgy reduces internal friction. This prevents the hydraulic oil from overheating during long shifts, which protects your seals and cylinder packings.
4. Professional Installation Protocol
To protect this high-value component, our 13-year experience dictates these mandatory steps:
Case Priming: MANDATORY. Fill the pump case with clean hydraulic oil through the highest drain port before starting the engine. Running dry for even 5 seconds will "score" the valve plate.
System Decontamination: If the previous pump failed mechanically, the hydraulic tank must be cleaned and the oil cooler flushed. Metal fragments from a failure will destroy a new pump instantly.
Filter Change: Install a new suction strainer and return filter (Genuine Hitachi 10-micron).
Air Purge: Run the engine at low idle for 10 minutes. Slowly cycle the cylinders to their limits to purge air before performing any heavy work.
5. Frequently Asked Questions (FAQ)
What is the difference between the ZX200-3 and the ZX200-3G pump?
While the internal pump mechanics (HPV102) are largely the same, the 3G (Global) series is often configured for higher-sulfur fuel environments and different cooling capacities. The pump regulators are tuned to match these specific engine performance profiles.
How do I know if my pump is an Original Brand?
Original units feature a data plate with the Hitachi or Hitachi Astemo (formerly Unisia/Nachi) branding. The casting will be clean and free of the rough textures found on low-quality clones.
How long does shipping take for a ZX200 pump?
Since this is a high-demand item, we typically have them ready for immediate dispatch. Global express shipping via DHL/FedEx/UPS usually takes 3 to 7 business days.
Does the pump come with the solenoid valves?
Yes, our Original Brand New assemblies come complete with the proportional solenoid valves and regulators pre-installed and factory-tested.